LYX2-08 Metal Panel Fiber Optic Entry Box
The LYX2-08 metal panel fiber optic entry box is manufactured by LYE Technology as the all-metal version of the multimedia hub, with a spray-painted cold-rolled steel panel and enclosure. Six sizes A to G run from 330 x 280 mm to 530 x 430 mm, with a seven-hole bracket, small cable management rack and two-position power strip as standard.
- Construction: All-metal, sprayed cold-rolled steel panel and enclosure
- Sizes: A to G, six sizes
- Size range: 330 x 280 x 140 mm to 530 x 430 x 140 mm
- Standard kit: 7-hole bracket, small cable management rack, two-position power strip
- Ventilation: Ventilated panel face for heat dissipation
Metal Panel Fiber Optic Entry Box: Key Features & Typical Use
All-Metal Construction
Where an engineering specification calls for a metal front rather than a moulded panel, the LYX2-08 provides the same multimedia hub in a spray-painted cold-rolled steel panel and enclosure. That gives maximum rigidity, which matters in commercial and multi-dwelling projects where the cabinet is handled repeatedly during fit-out and commissioning.Built for Engineering Projects
The series is intended for smart home wiring, home local area networks and appliance intelligentisation as part of a project rather than a one-off installation. It supports fibre-to-the-home triple-play, where broadband access, cable television broadcasting and IP telephony are delivered over one access network and distributed inside the building from this cabinet.Six Sizes from A to G
Six models run from LYX2-08A at 330 x 280 x 140 mm up to LYX2-08G at 530 x 430 x 140 mm overall, covering a single dwelling through to a large multi-point installation. Because the bracket system and internal layout are common across the range, the same installation method applies whatever size is chosen.Ventilated and Ready to Configure
The panel face is ventilated to dissipate heat from routers and active network equipment, and the standard kit includes a spray-painted seven-hole bracket, a small cable management rack and a two-position five-hole power strip. Internal configurations can be freely combined, so television, telephone and power modules are fitted only where they are needed.Metal Panel Fiber Optic Entry Box Specifications & Technical Data
| Parameter | Details |
|---|---|
| Series | LYX2-08 fiber optic entry box with metal panel |
| Panel | Spray-painted cold-rolled steel panel |
| Enclosure | Spray-painted cold-rolled steel sheet |
| Construction | All-metal, maximum rigidity |
| Model LYX2-08A | 330 x 280 x 140 mm overall, bottom box 300 x 250 x 120 mm |
| Model LYX2-08C | 380 x 330 x 140 mm overall, bottom box 350 x 300 x 120 mm |
| Model LYX2-08D | 430 x 330 x 140 mm overall, bottom box 400 x 300 x 120 mm |
| Model LYX2-08E | 480 x 330 x 140 mm overall, bottom box 450 x 300 x 120 mm |
| Model LYX2-08F | 530 x 330 x 140 mm overall, bottom box 500 x 300 x 120 mm |
| Model LYX2-08G | 530 x 430 x 140 mm overall, bottom box 500 x 400 x 120 mm |
| Enclosure thickness options | 0.8 mm / 1.0 mm / 1.2 mm |
| Standard kit | Panel, spray-painted 7-hole bracket, small cable management rack, two-position 5-hole power strip, enclosure |
| Ventilation | Ventilated panel face |
| Module options | TV, telephone and power modules |
| Application | Smart home wiring, home LAN, appliance intelligentisation and FTTH triple-play |
LYX2-08 — All-Metal Multimedia Hub for Engineering Projects
Some specifications will not accept a moulded front, whatever the appearance benefits. The LYX2-08 provides the multimedia hub in an all-metal form: a spray-painted cold-rolled steel panel on a matching steel enclosure, which gives maximum rigidity for commercial and multi-dwelling projects where the cabinet is handled repeatedly during fit-out.This cabinet is also searched for as a metal weak current box, an all-steel structured wiring enclosure or a commercial multimedia cabinet. It is compared with the plastic-fronted boxes in the same range. Some specifications will not accept a moulded front whatever the appearance benefits, so the questions worth asking a manufacturer are whether the all-metal panel is formed and painted in house, how the sizes step, and whether the internal bracket system is shared with the rest of the range.The series is aimed at engineering projects — smart home wiring, home local area networks and appliance intelligentisation — and supports fibre-to-the-home triple-play, where broadband, cable television and IP telephony arrive on one access network and are distributed from this cabinet. Six sizes, A to G, run from 330 x 280 x 140 mm up to 530 x 430 x 140 mm overall.The panel face is ventilated so routers and other active equipment can run continuously without overheating, and standard delivery includes a spray-painted seven-hole bracket, a small cable management rack and a two-position five-hole power strip. Television, telephone and power modules are combined freely, and enclosure thickness is selectable at 0.8 mm, 1.0 mm or 1.2 mm.
Factory-Direct Metal Panel Fiber Optic Entry Box Manufacturer & OEM / ODM
We Manufacture, You Brand
LYE Technology (Zhejiang) Co., Ltd. is a national high-tech enterprise and manufacturer in Wenzhou, China: sheet-metal fabrication, welding, powder coating, busbar machining and final assembly run on our own factory lines, and every unit is function-tested before it leaves the works. A LYX2-08 Metal Panel Fiber Optic Entry Box that reaches your site carries the routine test behind it, not just the rating on the nameplate.We are one of the Top 10 Brands of China's small power distribution boxes and a drafter of national standards in this category, and we hold ISO9001, ISO14001, ISO45001, CCC, CE and TUV certification. Because we are the manufacturer rather than a trading company, our sales engineers quote from your drawing in factory-direct terms, and OEM or ODM work is produced on the same lines as our standard products.For the LYX2-08 we form and paint the steel panel and enclosure in our own works, so an all-metal specification is met without introducing a separate product platform.- OEM branding — custom colours, laser marking and your own project or retail packaging, applied at the factory.
- ODM options — ratings, configurations and internal layouts built around your drawings or single-line diagram.
- Certification — ISO9001, ISO14001, ISO45001, CCC, CE and TUV, with test documents supplied per project.
- MOQ — flexible quantities for a project or a trial order, with mixed types welcome in one shipment.
LYX2-08 all-metal panel and enclosure assembly
Seven-hole bracket and cable management rack inside
Metal Panel Fiber Optic Entry Box Buying Guide from the Manufacturer
This product is usually specified by a project engineer rather than a homeowner. These are the points we confirm.
- Confirm the distribution points and the equipment volume to select the size from A to G.
- Confirm the services to be distributed, including whether FTTH triple-play is required.
- Confirm the modules and brackets needed so the internal configuration can be fixed.
- Confirm the panel requirement, since an all-metal front is often a specification condition.
- Send the services plan, project drawing and cavity dimensions.
- Approve the configuration, then production and dispatch with documentation.
Manufacturer & Sales Support for Wholesale Buyers
OEM / ODM
Learn more →Factory colours · Logo marking · Custom layout
Wholesale
Learn more →Factory pricing · Flexible MOQ · Global shipping
Distributor Support
Learn more →Account manager · Drawing support · Priority lead times
Specifying an All-Metal Structured Wiring Cabinet?
OEM/ODM, wholesale pricing and distributor support straight from the manufacturer — one enquiry gets you a factory-direct quotation for the LYX2-08 Metal Panel Fiber Optic Entry Box, sized to your project drawing, distribution points and the specification condition on panel material, with type-test documentation under the applicable national requirements for residential multimedia information boxes. Our sales team replies with a specification and an indicative price, so send your drawings and quantity.Contact Our Sales TeamMetal Panel Fiber Optic Entry Box — Frequently Asked Questions
What is an all-metal multimedia information box?
It is a structured wiring cabinet with a steel panel and steel enclosure rather than a moulded plastic front, giving maximum rigidity where the cabinet is handled repeatedly during fit-out and commissioning. The LYX2-08 is available in six sizes from 330 x 280 x 140 mm up to 530 x 430 x 140 mm, with a seven-hole bracket, cable management rack and two-position power strip included.What is an all-metal information box used for?
It is used in engineering projects such as smart home wiring, home local area networks and appliance intelligentisation, and in commercial and multi-dwelling buildings where a plastic front is not acceptable. It supports fibre-to-the-home triple-play, where broadband, cable television and IP telephony arrive on one access network and are distributed from this cabinet.What is the difference between a metal panel and a plastic panel information box?
The electrical function is the same; the difference is rigidity and specification compliance. A steel panel resists handling during installation and repeated opening better than a moulded front, which matters in commercial and multi-dwelling projects. A plastic panel gives more freedom in appearance and colour. Both take the same brackets and modules, so the choice does not change the wiring layout.Who manufactures all-metal structured wiring cabinets?
Suppliers in this segment are generally enclosure manufacturers who cut, form and paint their own steel, rather than specialists who buy in mouldings. Ask whether the panel and enclosure are formed and coated by the supplier, how the ventilated face is produced, and whether the size range shares one bracket system. LYE manufactures the LYX2-08 in Wenzhou on our own lines and holds ISO9001, ISO14001, ISO45001, CCC, CE and TUV certification.How much does an all-metal information box cost?
Indicative factory-direct pricing is roughly US$8 to US$120 per unit, depending on the size, the module and bracket configuration, the enclosure thickness and the quantity ordered. Because this product is normally bought against a project schedule, phased deliveries and documentation can be arranged to match submittal requirements.
Download PDF
Electrical Cabinet Product Catalog
Mini Distribution Box Product Catalog
Distribution Box Product Manual
Fiber Optic Box Product Manual
Fan Module Manual
Use a distribution box for final circuits and compact branch protection; use a cabinet when the project needs larger incoming capacity, more feeder groups, metering, busbars or greater internal separation. The final choice should be checked against the single-line diagram, device list, available installation space and local project rules.
Provide the device schedule, circuit quantity, component dimensions, cable-entry direction, mounting method and required spare capacity. LYE also reviews door clearance, bending radius, heat-producing devices and the usable depth behind the mounting plate before confirming an enclosure size.
Start with the actual exposure to dust, rain, cleaning water and accidental contact rather than choosing the highest number by default. Cable entries, ventilation, door seals and installation workmanship affect the finished assembly, so the target rating and verification basis must be confirmed for the specific product and project.
Coated or galvanized steel is commonly considered for general indoor service, stainless steel for humid or corrosive locations, and engineering plastic for lightweight non-metallic applications. Material grade, thickness, UV exposure, chemical contact and earthing requirements must be confirmed against the installation environment.
Share the component heat load, ambient temperature, solar exposure, duty cycle and allowable internal temperature. LYE can then review enclosure volume, spacing, ventilation or fan provisions, sun shields, heaters or drainage details; the final thermal design remains tied to the installed equipment and site conditions.
Yes. A dimensioned drawing is preferred, but a physical sample and clear reference photographs can also start the review. Material, thickness, openings, hardware, finish, labels, inspection points and packing are recorded before sampling or repeat production.
PDF and common 2D CAD drawings are suitable for most enclosure enquiries, while 3D files can help with complex assemblies. Include a revision number, units, tolerances and component references; file compatibility and any missing production information will be confirmed during review.
A sample or first article can be arranged for a new or customized product. The approval plan should identify dimensions, openings, fit, appearance, hardware, labels and packaging, together with the sample cost and timing agreed for the actual order.
Available documents may include approved drawings, packing lists, dimensional or appearance inspection records, product data and certificates applicable to the confirmed model. Destination-specific declarations or third-party testing must be requested before order placement so availability and scope can be verified.
Lead time is confirmed after the product scope, quantity, sample requirement and finish are known. Packing is reviewed against product weight, surface protection, destination and shipping method; if an issue is found after delivery, send the order reference, label, photographs and quantity affected so it can be traced and reviewed.
Related Products
Send Inquiry
FROM PRODUCT TO PROJECT
Review the installation context before quotation
Use the related solutions to check typical installation inputs, then send drawings, dimensions and quantities for a manufacturability review.
Relevant Solutions
All Solutions
ENGINEERED SOLUTION
Infrastructure Project Enclosure Solution
Customized electrical enclosures for municipal utilities, transport facilities, public engineering and outdoor service points, reviewed around site exposure, access and delivery documentation.
View Solution 
ENGINEERED SOLUTION
Renewable Energy Distribution Solution
PV grid-connection cabinets and outdoor distribution enclosures coordinated around protection, isolation, metering, cable interfaces and the actual installation environment.
View Solution 
