LYX1-08 Fiber Optic Entry Box
The LYX1-08 fiber optic entry box is manufactured by LYE Technology as the network hub for residential structured wiring, with a ventilated ABS panel over a spray-painted cold-rolled steel enclosure. Five sizes A to E run from 325 x 275 mm to 525 x 425 mm, with a four-hole bracket, router shelf and dual five-hole power strip as standard.
- Sizes: A to E, five sizes
- Size range: 325 x 275 x 140 mm to 525 x 425 x 140 mm
- Panel and enclosure: Ventilated ABS panel, spray-painted cold-rolled steel
- Standard kit: 4-hole bracket, router shelf, dual 5-hole power strip, enclosure
- Modules: TV, telephone and power modules
Fiber Optic Entry Box: Key Features & Typical Use
A Network Hub Instead of a Junction Box
The fibre entry box exists because residential wiring used to be planned, installed and managed chaotically. By treating the box as the network hub rather than a termination point, adding a device, cancelling a service or moving a port becomes a patching exercise inside the cabinet instead of a new cable run through the building.Five Sizes from Apartment to Large Villa
Sizes A to E run from 325 x 275 x 140 mm up to 525 x 425 x 140 mm overall, covering a small apartment through to a large detached house with several distribution points. Because the construction and internal system are identical across the sizes, a contractor can use the same approach on every property in a development.Ventilated Panel for Active Equipment
The ABS panel is designed with ventilation, which matters because the cabinet typically houses a router and power supply running continuously. Ventilating the panel while keeping the spray-painted steel enclosure behind it allows heat to escape without losing the structural rigidity a wall-mounted cabinet needs.Ready to Terminate Fibre and Distribute
The standard kit includes a plastic four-hole bracket, a simple router shelf and a dual five-hole power strip, so the box is usable as soon as it is installed. Internal configurations can be freely combined, and television, telephone and power modules are added where they are needed, keeping the installation matched to the property rather than over-specified.Fiber Optic Entry Box Specifications & Technical Data
| Parameter | Details |
|---|---|
| Series | LYX1-08 fiber optic entry box |
| Panel | ABS panel with ventilation design |
| Enclosure | Spray-painted cold-rolled steel sheet |
| Model LYX1-08A | 325 x 275 x 140 mm overall, bottom box 300 x 250 x 120 mm |
| Model LYX1-08B | 370 x 260 x 140 mm overall, bottom box 350 x 250 x 120 mm |
| Model LYX1-08C | 375 x 325 x 140 mm overall, bottom box 350 x 300 x 120 mm |
| Model LYX1-08D | 425 x 325 x 140 mm overall, bottom box 400 x 300 x 120 mm |
| Model LYX1-08E | 525 x 425 x 140 mm overall, bottom box 500 x 400 x 120 mm |
| Enclosure thickness options | 0.8 mm / 1.0 mm / 1.2 mm |
| Standard kit | Panel, plastic 4-hole bracket, simple router shelf, dual 5-hole power strip, enclosure |
| Module options | TV, telephone and power modules |
| Internal configuration | Modules can be freely combined |
| Installation | Recessed in wall cavity or cabinet mounted |
| Application | Apartments through to large villas, smart home and FTTH projects |
LYX1-08 — Fibre Optic Entry Box as the Home Network Hub
Before fibre entry boxes existed, planning and managing residential wiring was chaotic: every new service meant another cable through a wall and another box screwed to a skirting board. The LYX1-08 treats the cabinet as the network hub instead, so adding a device, cancelling a service or reconfiguring a port becomes a patching task inside one enclosure.This product is also called a fibre termination box, an FTTH entry box or a broadband distribution cabinet, and it is compared with simple optical termination boxes and with the larger multimedia cabinets. Fibre-to-the-home delivers broadband, cable television and IP telephony over one access network, so the questions worth asking a manufacturer are whether the cabinet has room for the router and the distribution modules, and how the size steps map onto single dwellings and larger properties.Five sizes are offered, A to E, from 325 x 275 x 140 mm up to 525 x 425 x 140 mm overall, covering a compact apartment through to a large villa with multiple distribution points. Each has a ventilated ABS panel over a spray-painted cold-rolled steel enclosure, so active equipment such as a router can run continuously without overheating.Standard delivery includes a plastic four-hole bracket, a simple router shelf and a dual five-hole power strip, so the box can be commissioned immediately. Television, telephone and power modules can be combined freely inside, and enclosure thickness is selectable at 0.8 mm, 1.0 mm or 1.2 mm to suit the project and the handling the cabinet will receive.Factory-Direct Fiber Optic Entry Box Manufacturer & OEM / ODM
We Manufacture, You Brand
LYE Technology (Zhejiang) Co., Ltd. is a national high-tech enterprise and manufacturer in Wenzhou, China: sheet-metal fabrication, welding, powder coating, busbar machining and final assembly run on our own factory lines, and every unit is function-tested before it leaves the works. A LYX1-08 Fiber Optic Entry Box that reaches your site carries the routine test behind it, not just the rating on the nameplate.We are one of the Top 10 Brands of China's small power distribution boxes and a drafter of national standards in this category, and we hold ISO9001, ISO14001, ISO45001, CCC, CE and TUV certification. Because we are the manufacturer rather than a trading company, our sales engineers quote from your drawing in factory-direct terms, and OEM or ODM work is produced on the same lines as our standard products.For the LYX1-08 we mould the ventilated panel and form the enclosure across five sizes in-house, so a single project can be supplied with the exact size mix it needs.- OEM branding — custom colours, laser marking and your own project or retail packaging, applied at the factory.
- ODM options — ratings, configurations and internal layouts built around your drawings or single-line diagram.
- Certification — ISO9001, ISO14001, ISO45001, CCC, CE and TUV, with test documents supplied per project.
- MOQ — flexible quantities for a project or a trial order, with mixed types welcome in one shipment.
LYX1-08E enclosure for a large villa fibre installation
Ventilated panel and internal module arrangement
Fiber Optic Entry Box Buying Guide from the Manufacturer
Size is the main decision on this product, and it follows the number of distribution points. These are the points we confirm.
- Confirm the number of rooms and distribution points to select the size from A to E.
- Confirm the services to be distributed and the modules required inside the cabinet.
- Confirm the incoming fibre position and the cable route to the cabinet.
- Confirm the cavity depth against the 140 mm overall depth of the enclosure.
- Send the services plan, floor layout and the position of the fibre entry.
- Approve the configuration, then production and dispatch.
Manufacturer & Sales Support for Wholesale Buyers
OEM / ODM
Learn more →Factory colours · Logo marking · Custom layout
Wholesale
Learn more →Factory pricing · Flexible MOQ · Global shipping
Distributor Support
Learn more →Account manager · Drawing support · Priority lead times
Specifying Fibre Entry and Structured Wiring?
OEM/ODM, wholesale pricing and distributor support straight from the manufacturer — one enquiry gets you a factory-direct quotation for the LYX1-08 Fiber Optic Entry Box, sized to your services plan, the number of distribution points and the fibre entry position, with type-test documentation under the applicable national requirements for residential multimedia information boxes. Our sales team replies with a specification and an indicative price, so send your drawings and quantity.Contact Our Sales TeamFiber Optic Entry Box — Frequently Asked Questions
What is a fiber optic entry box?
It is the enclosure where the incoming optical fibre is terminated and from which data, television and telephone services are distributed inside a property. The LYX1-08 is available in five sizes from 325 x 275 x 140 mm up to 525 x 425 x 140 mm, with a ventilated ABS panel over a spray-painted cold-rolled steel enclosure and a four-hole bracket, router shelf and dual power strip as standard.What is a fibre optic entry box used for?
It is used in fibre-to-the-home and structured wiring projects to turn the incoming fibre into a manageable network hub. Rather than a bare junction, the cabinet holds the optical termination, the router and the distribution modules for data, television and telephony, so adding a device or reconfiguring a port becomes a patching operation inside the box.What is the difference between FTTH and FTTC?
FTTH means fibre reaches the individual premises, so the optical connection terminates inside the property and the cabinet is installed in the home. FTTC means fibre reaches a street cabinet and the final connection to the premises uses copper, so the in-building wiring is different and the entry box may be used purely for distribution. FTTH gives far higher bandwidth and is the arrangement new cabinets are usually specified for.Who manufactures fiber optic entry boxes?
The category is served by specialist structured wiring brands and by enclosure manufacturers who also build distribution boards. Ask whether the panel is moulded and the enclosure formed by the supplier, how the internal brackets scale across the size range, and whether the cabinet is ventilated for a running router. LYE manufactures the LYX1-08 in Wenzhou and holds ISO9001, ISO14001, ISO45001, CCC, CE and TUV certification.How much does a fiber optic entry box cost?
Indicative factory-direct pricing is roughly US$8 to US$120 per unit, depending on the size, the modules and brackets selected, the enclosure thickness and the quantity ordered. Because a development usually needs more of the small sizes and fewer of the large ones, mixing sizes within one order is normal and normally costs less than placing separate requisitions.
Download PDF
Electrical Cabinet Product Catalog
Mini Distribution Box Product Catalog
Distribution Box Product Manual
Fiber Optic Box Product Manual
Fan Module Manual
Use a distribution box for final circuits and compact branch protection; use a cabinet when the project needs larger incoming capacity, more feeder groups, metering, busbars or greater internal separation. The final choice should be checked against the single-line diagram, device list, available installation space and local project rules.
Provide the device schedule, circuit quantity, component dimensions, cable-entry direction, mounting method and required spare capacity. LYE also reviews door clearance, bending radius, heat-producing devices and the usable depth behind the mounting plate before confirming an enclosure size.
Start with the actual exposure to dust, rain, cleaning water and accidental contact rather than choosing the highest number by default. Cable entries, ventilation, door seals and installation workmanship affect the finished assembly, so the target rating and verification basis must be confirmed for the specific product and project.
Coated or galvanized steel is commonly considered for general indoor service, stainless steel for humid or corrosive locations, and engineering plastic for lightweight non-metallic applications. Material grade, thickness, UV exposure, chemical contact and earthing requirements must be confirmed against the installation environment.
Share the component heat load, ambient temperature, solar exposure, duty cycle and allowable internal temperature. LYE can then review enclosure volume, spacing, ventilation or fan provisions, sun shields, heaters or drainage details; the final thermal design remains tied to the installed equipment and site conditions.
Yes. A dimensioned drawing is preferred, but a physical sample and clear reference photographs can also start the review. Material, thickness, openings, hardware, finish, labels, inspection points and packing are recorded before sampling or repeat production.
PDF and common 2D CAD drawings are suitable for most enclosure enquiries, while 3D files can help with complex assemblies. Include a revision number, units, tolerances and component references; file compatibility and any missing production information will be confirmed during review.
A sample or first article can be arranged for a new or customized product. The approval plan should identify dimensions, openings, fit, appearance, hardware, labels and packaging, together with the sample cost and timing agreed for the actual order.
Available documents may include approved drawings, packing lists, dimensional or appearance inspection records, product data and certificates applicable to the confirmed model. Destination-specific declarations or third-party testing must be requested before order placement so availability and scope can be verified.
Lead time is confirmed after the product scope, quantity, sample requirement and finish are known. Packing is reviewed against product weight, surface protection, destination and shipping method; if an issue is found after delivery, send the order reference, label, photographs and quantity affected so it can be traced and reviewed.
Related Products
Send Inquiry
FROM PRODUCT TO PROJECT
Review the installation context before quotation
Use the related solutions to check typical installation inputs, then send drawings, dimensions and quantities for a manufacturability review.
Relevant Solutions
All Solutions
ENGINEERED SOLUTION
Infrastructure Project Enclosure Solution
Customized electrical enclosures for municipal utilities, transport facilities, public engineering and outdoor service points, reviewed around site exposure, access and delivery documentation.
View Solution 
ENGINEERED SOLUTION
Renewable Energy Distribution Solution
PV grid-connection cabinets and outdoor distribution enclosures coordinated around protection, isolation, metering, cable interfaces and the actual installation environment.
View Solution 
