LYX1-01 Smart Home Multimedia Information Box
The LYX1-01 smart home multimedia information box is manufactured by LYE Technology with a ventilated ABS panel over a spray-painted cold-rolled steel enclosure. At 425 x 325 x 140 mm it centralises fibre, data and AV termination, and the standard kit includes a four-hole bracket, router shelf, dual five-hole power strip and enclosure.
- Dimensions: 425 x 325 x 140 mm, bottom box 400 x 300 x 120 mm
- Panel and enclosure: Ventilated ABS panel, spray-painted cold-rolled steel
- Standard kit: 4-hole bracket, router shelf, dual 5-hole power strip, enclosure
- Module options: TV, telephone and power modules
- Enclosure thickness: 0.8 mm / 1.0 mm / 1.2 mm
Smart Home Multimedia Information Box: Key Features & Typical Use
One Cabinet Instead of a Shelf of Boxes
Fibre termination, the router, the television distribution and the telephone splitter normally end up on a shelf or in a cupboard, connected by a tangle of fly leads. The LYX1-01 gathers all of it into one ventilated enclosure, so a fault can be traced from a single point and new services are added by patching inside the cabinet rather than running a new cable through the house.Ventilated Panel for Active Equipment
The panel is designed with ventilation, which matters because a router and its power supply run continuously and produce heat in a closed cabinet. An ABS panel over a spray-painted cold-rolled steel enclosure gives light weight and rigidity together, and the ventilation keeps the active devices inside operating within their temperature range.A Standard Kit Ready for a Typical Home
The standard configuration includes the panel, a plastic four-hole bracket, a simple router shelf, a dual five-hole power strip and the enclosure. That covers the usual requirement of mounting a router, powering two devices and holding two modules. Internal configurations can be freely combined, with plastic four-hole, spray-painted four-hole and spray-painted seven-hole brackets plus simple, small and large cable management racks.Sized for a Shallow Wall Cavity
At 425 x 325 x 140 mm overall with a 400 x 300 x 120 mm bottom box, the cabinet fits a normal stud or block wall cavity without a bespoke recess. Enclosure thickness can be selected at 0.8 mm, 1.0 mm or 1.2 mm, so the same cabinet can be specified for a large residential development or a single high-end installation without changing its footprint.Smart Home Multimedia Information Box Specifications & Technical Data
| Parameter | Details |
|---|---|
| Series | LYX1-01 smart home multimedia information box |
| Panel | ABS panel with ventilation design |
| Enclosure | Spray-painted cold-rolled steel sheet |
| Overall dimensions | 425 x 325 x 140 mm |
| Bottom box dimensions | 400 x 300 x 120 mm |
| Enclosure thickness options | 0.8 mm / 1.0 mm / 1.2 mm |
| Standard kit | Panel, plastic 4-hole bracket, simple router shelf, dual 5-hole power strip, enclosure |
| Module options | TV, telephone and power modules |
| Bracket options | Plastic 4-hole, spray-painted 4-hole, spray-painted 7-hole |
| Cable management options | Simple, small and large cable management racks |
| Internal configuration | Modules can be freely combined |
| Compatible services | Fibre entry, data, television and telephony |
| Installation | Recessed in wall cavity or cabinet mounted |
| Application | Smart home wiring, home LAN and appliance intelligentisation projects |
LYX1-01 — Centralised Multimedia Information Box for the Connected Home
A modern home terminates fibre, distributes television, splits telephone lines and runs a router, and none of those things was in the original building design. The LYX1-01 gives them one place to live: a ventilated ABS panel over a spray-painted steel enclosure measuring 425 x 325 x 140 mm, with a 400 x 300 x 120 mm bottom box that fits a standard wall cavity.This enclosure is also called a structured wiring cabinet, a weak current box or a home network distribution box. It is compared with simple fibre termination boxes and with shallow AV distribution enclosures. Fibre termination, the router, television distribution and the telephone splitter normally end up on a shelf connected by a tangle of leads, so the questions worth asking a manufacturer are whether the cabinet is ventilated for active equipment and whether the brackets match the services the household will actually use.Because the panel is ventilated and the enclosure is steel-backed, active equipment such as a router can run continuously inside the cabinet without overheating and without the panel flexing. The standard kit includes a plastic four-hole bracket, a simple router shelf, a dual five-hole power strip and the enclosure, which covers the usual requirement without extra parts.Internal configurations can be freely combined: brackets are available in plastic four-hole, spray-painted four-hole and spray-painted seven-hole versions, with simple, small and large cable management racks. Television, telephone and power modules can be added as the household's services grow, and enclosure thickness is selectable at 0.8 mm, 1.0 mm or 1.2 mm.Factory-Direct Smart Home Multimedia Information Box Manufacturer & OEM / ODM
We Manufacture, You Brand
LYE Technology (Zhejiang) Co., Ltd. is a national high-tech enterprise and manufacturer in Wenzhou, China: sheet-metal fabrication, welding, powder coating, busbar machining and final assembly run on our own factory lines, and every unit is function-tested before it leaves the works. A LYX1-01 Smart Home Multimedia Information Box that reaches your site carries the routine test behind it, not just the rating on the nameplate.We are one of the Top 10 Brands of China's small power distribution boxes and a drafter of national standards in this category, and we hold ISO9001, ISO14001, ISO45001, CCC, CE and TUV certification. Because we are the manufacturer rather than a trading company, our sales engineers quote from your drawing in factory-direct terms, and OEM or ODM work is produced on the same lines as our standard products.For the LYX1-01 we mould the panel and form the steel enclosure in-house, so the bracket pattern and module layout can be fixed to the services you actually plan to distribute.- OEM branding — custom colours, laser marking and your own project or retail packaging, applied at the factory.
- ODM options — ratings, configurations and internal layouts built around your drawings or single-line diagram.
- Certification — ISO9001, ISO14001, ISO45001, CCC, CE and TUV, with test documents supplied per project.
- MOQ — flexible quantities for a project or a trial order, with mixed types welcome in one shipment.
LYX1-01 box with ventilated ABS panel and router shelf
Dual five-hole power strip and cable management rack inside
Smart Home Multimedia Information Box Buying Guide from the Manufacturer
These boxes are ordered from the services the household will actually use. These are the points we confirm.
- Confirm which services enter the property: fibre, data, television and telephony.
- Confirm the modules and brackets needed so the internal configuration can be fixed.
- Confirm the wall cavity depth and position relative to the incoming fibre and power.
- Confirm the enclosure thickness required, 0.8 mm, 1.0 mm or 1.2 mm.
- Send the services plan, floor layout and power outlet position.
- Approve the configuration, then production and dispatch.
Manufacturer & Sales Support for Wholesale Buyers
OEM / ODM
Learn more →Factory colours · Logo marking · Custom layout
Wholesale
Learn more →Factory pricing · Flexible MOQ · Global shipping
Distributor Support
Learn more →Account manager · Drawing support · Priority lead times
Specifying Structured Wiring for a Residential Project?
OEM/ODM, wholesale pricing and distributor support straight from the manufacturer — one enquiry gets you a factory-direct quotation for the LYX1-01 Smart Home Multimedia Information Box, sized to your services plan, the modules required and the wall cavity available at each position, with type-test documentation under the applicable national requirements for residential multimedia information boxes. Our sales team replies with a specification and an indicative price, so send your drawings and quantity.Contact Our Sales TeamSmart Home Multimedia Information Box — Frequently Asked Questions
What is a smart home multimedia information box?
It is the enclosure that centralises structured wiring in a connected home, gathering fibre termination, data distribution, television and telephone services into one cabinet with local power. The LYX1-01 measures 425 x 325 x 140 mm with a 400 x 300 x 120 mm bottom box, and uses a ventilated ABS panel over a spray-painted cold-rolled steel enclosure.What is a multimedia information box used for?
It is used to terminate and distribute the services entering a property so that adding a device, changing provider or reconfiguring a data port becomes a patching task inside one cabinet rather than a new cable run through finished walls. It is installed during construction or renovation, normally in a utility area, hallway or services cupboard.Why does a multimedia information box need ventilation?
Because the devices inside run continuously. A router and its power supply produce heat in a closed cabinet, and sustained temperature above the equipment's design range shortens service life and causes intermittent faults. Ventilating the panel while keeping the steel enclosure behind it allows heat to leave by convection without losing the rigidity the wall-mounted cabinet needs.Who manufactures multimedia information boxes?
Suppliers fall into specialist structured wiring brands and electrical enclosure manufacturers who also build distribution boards, and the difference is usually in the bracket and module system rather than in the box. Ask whether the panel and enclosure are produced by the supplier, which module types and brackets are available, and whether internal configurations can be combined freely. LYE manufactures the LYX1-01 in Wenzhou and holds ISO9001, ISO14001, ISO45001, CCC, CE and TUV certification.How much does a multimedia information box cost?
Indicative factory-direct pricing is roughly US$8 to US$120 per unit, depending on the size, the modules and brackets selected, the enclosure thickness and the quantity ordered. Because the cabinet is usually a small part of a wiring installation, the more useful comparison is the installed cost including the modules, since those determine what the box can actually distribute.
Download PDF
Electrical Cabinet Product Catalog
Mini Distribution Box Product Catalog
Distribution Box Product Manual
Fiber Optic Box Product Manual
Fan Module Manual
Use a distribution box for final circuits and compact branch protection; use a cabinet when the project needs larger incoming capacity, more feeder groups, metering, busbars or greater internal separation. The final choice should be checked against the single-line diagram, device list, available installation space and local project rules.
Provide the device schedule, circuit quantity, component dimensions, cable-entry direction, mounting method and required spare capacity. LYE also reviews door clearance, bending radius, heat-producing devices and the usable depth behind the mounting plate before confirming an enclosure size.
Start with the actual exposure to dust, rain, cleaning water and accidental contact rather than choosing the highest number by default. Cable entries, ventilation, door seals and installation workmanship affect the finished assembly, so the target rating and verification basis must be confirmed for the specific product and project.
Coated or galvanized steel is commonly considered for general indoor service, stainless steel for humid or corrosive locations, and engineering plastic for lightweight non-metallic applications. Material grade, thickness, UV exposure, chemical contact and earthing requirements must be confirmed against the installation environment.
Share the component heat load, ambient temperature, solar exposure, duty cycle and allowable internal temperature. LYE can then review enclosure volume, spacing, ventilation or fan provisions, sun shields, heaters or drainage details; the final thermal design remains tied to the installed equipment and site conditions.
Yes. A dimensioned drawing is preferred, but a physical sample and clear reference photographs can also start the review. Material, thickness, openings, hardware, finish, labels, inspection points and packing are recorded before sampling or repeat production.
PDF and common 2D CAD drawings are suitable for most enclosure enquiries, while 3D files can help with complex assemblies. Include a revision number, units, tolerances and component references; file compatibility and any missing production information will be confirmed during review.
A sample or first article can be arranged for a new or customized product. The approval plan should identify dimensions, openings, fit, appearance, hardware, labels and packaging, together with the sample cost and timing agreed for the actual order.
Available documents may include approved drawings, packing lists, dimensional or appearance inspection records, product data and certificates applicable to the confirmed model. Destination-specific declarations or third-party testing must be requested before order placement so availability and scope can be verified.
Lead time is confirmed after the product scope, quantity, sample requirement and finish are known. Packing is reviewed against product weight, surface protection, destination and shipping method; if an issue is found after delivery, send the order reference, label, photographs and quantity affected so it can be traced and reviewed.
Related Products
Send Inquiry
FROM PRODUCT TO PROJECT
Review the installation context before quotation
Use the related solutions to check typical installation inputs, then send drawings, dimensions and quantities for a manufacturability review.
Relevant Solutions
All Solutions
ENGINEERED SOLUTION
Infrastructure Project Enclosure Solution
Customized electrical enclosures for municipal utilities, transport facilities, public engineering and outdoor service points, reviewed around site exposure, access and delivery documentation.
View Solution 
ENGINEERED SOLUTION
Renewable Energy Distribution Solution
PV grid-connection cabinets and outdoor distribution enclosures coordinated around protection, isolation, metering, cable interfaces and the actual installation environment.
View Solution 
